Resources

The following is a list of resources I will need to create my 3D cube.
This list has been taken directly from the tutorial I will be following.

LED Cube Kit (P/N 2146329) Kit includes: (1) Prototyping Board PN 206594 (1) Atmel AVR Atmega 16 Microcontroller- 323133 (64) Blue Diffused 3mm LEDs PN 333383 (18) 220 Ohm Resistors PN 690700 (1) Red LED PN 333973 (1) Green LED PN 34761 (1) 10k Ohm Resistor PN 691104 (4) 2.2k Ohm Resistor PN 690945 (4) BC337 Transistors PN 254810 (3) 0.1uF Capacitor PN 544921 (2) 22pF Capacitor PN 15405 (1) 14.7456MHz Crystal PN 324187 (2) SPST Buttons PN 155380 (1) 40 Pin IC Socket PN 112311 (1) 10 Pin Header PN 67812 (1) ISP Programmer PN 2136788 (1) USB Cable PN 222010 (1) Hookup Wire PN 2152884 (1) Coin Cell Battery PN 2123784

Optional Materials: (1) 10uF Capacitor PN 29891 (1) 1000uF Capacitor PN 330722 (1) 7805T Transistor- 51262 (1) Battery Clip PN 11280 (1) 9V Battery PN 198731 Tools list: Wire Cutters PN 35482 Pliers PN 177608 63/37 Solder PN 151474 Solder Flux PN 2094258 Solder Wick PN 41082 25W Soldering Iron PN 129040 Soldering Stand PN 36329 Sponge PN 134631 LED Tester PN 355805